Jetson Solutions
The Jetson Solutions menu brings everything for NVIDIA Jetson devices together in one place:
| Page | What it is for |
|---|---|
| Control Center | Monitor and tune your Jetson devices: live metrics, power modes, fan and Jetson Clocks. |
| Jetson AI Lab | Models tested on Jetson, ready to run. See Jetson AI Lab. |
| Jetson Lineup | Compare the Jetson modules side by side. See Jetson Lineup. |
Control Center
Jetson Solutions → Control Center lists all Jetson devices in your organization. Online devices come first.
- Search Jetsons — search by device name, module, L4T or JetPack version.
- All / Online / Offline — filter by device state.
- Refresh — reload the list.
Each card shows the module (for example AGX Orin 64GB) and the device name, with JetPack, L4T, memory and TOPS tags.
Connect to a device
Live data is read straight from the device, so a connection must be open. Click the connection button on the card:
| Button | Meaning |
|---|---|
| Online | The device is online. Click to connect. |
| Connecting... | The connection is being opened. |
| Connected | Connected. Click again to disconnect. |
| Offline | The device is offline; start the Cordatus client on it. |
| Expired | The device token has expired; the device cannot be connected. |
Once connected, the card shows CPU, GPU and Memory usage, refreshed every few seconds. The bars turn amber at 70% and red at 90%. A Client update badge means the Cordatus client on the device should be updated.
Click the card or Details to open the device page.
If no Jetson is listed yet, install the Cordatus client on your Jetson (Orin, Xavier, Thor or Nano). See the Installation guide.
Device page
The device page has two tabs: Overview and System. The header repeats the module, JetPack, L4T, unified memory, TOPS and GPU architecture, with the connection button.
Run on this Jetson
The Overview tab starts with shortcuts that open with this Jetson already selected. When the device is connected, it also shows how much unified memory is free right now.
| Tile | Opens |
|---|---|
| LLM Models | The LLM Models list, filtered for this device. |
| Jetson AI Lab | Jetson AI Lab models for this module. |
| Vision models | AI Platform → Inference Engine (detection, pipelines). |
| Custom Engines | AI Platform → Custom Engines. |
| Jobs | The analytics jobs. |
| Running workloads | The containers on your devices. |
Live dashboard
When the device is connected, the dashboard is refreshed every 1.5 seconds:
- CPU, GPU, Memory, Power (whole module, W), Temperature (hottest zone) and Power mode (with the Jetson Clocks state).
- Utilization over time — GPU, CPU, memory and memory bandwidth for the last 5 minutes.
- Power by rail — GPU + SoC, CPU + CV, System 5V, Memory and the total, if the module reports them.
- Unified memory — used, cache and free memory shared by the CPU and the GPU, plus swap.
- Temperatures — CPU, GPU, junction, board and other thermal zones, and the fan speed. The module throttles near 99 °C; values turn amber at 75 °C and red at 85 °C.
- CPU cores, Network (download / upload, MB/s) and Storage & client (free disk, Launch on startup, Cordatus containers).
- Hardware engines — video, vision and deep learning accelerators in use right now.
- Top processes — the processes holding the most GPU memory.
Hardware engines and Top processes need Cordatus client 2.3.80 or newer on the device.
Power & Cooling
Power Modes lists the device's nvpmodel modes with CPU cores, CPU / GPU / memory / DLA / PVA maximum frequencies. The current mode is marked Active.
- Click a mode.
- Enter the device's sudo password.
- If the mode needs a reboot, confirm with Yes, proceed. The device reboots to activate it.
Fan — choose Automatic, or Manual and set the speed with the slider or the −/+ buttons (5% steps).
Jetson Clocks — turn On to run the CPU and GPU at their highest frequency (maximum performance mode), Off to return to normal.
System tab
Hardware and software details read from the device (Refresh updates them):
| Card | Contents |
|---|---|
| General Information | Module, model, SoC, codename, JetPack, public IP, SSH user, timezone, network interfaces. |
| Jetson Hardware | L4T, part number, P-number, serial number, CUDA architecture. |
| Jetson Platform | Distribution, machine, Python, release, system. |
| Jetson Libraries | CUDA, cuDNN, TensorRT, OpenCV, VPI, Vulkan versions. |